Your cartClose

Your cart is currently empty.

Login Close

Bicycle Wash & Cleaners

Something different, every day.


Riding your bike is even more enjoyable if it is clean and shiny in the sun, which requires keeping it clean. Washing a bike is quite simple, but you need to know some rules so that you have to repair it later. Nowadays, most modern bicycles have additional equipment - derailleurs, brakes, etc., so you need to be especially careful when washing speed and mountain bikes.

Bicycle Wash & Cleaners

A bicycle, like any other technical vehicle, must be clean and lubricated. Dirt on a bike can not only affect the performance of its components but can significantly shorten its lifespan. For example, sand and dirt on a bicycle chain increases wear and tear. Therefore, if you are asking the question - "is it possible to wash the bike?", Then the answer is unequivocal - it is possible and even gently! We have prepared a material for you in which we will tell you how to wash your bike properly, where to wash it and what detergents you can use.

Your bike needs to be washed regularly, not just to keep it looking tidy.

Clean parts and mechanisms will last longer, which means you don't have to spend time and money on repairing and replacing them. That is why it is important to regularly remove dirt and keep the vehicle clean at any time of the year. Washing a bike is a simple process, even a beginner cyclist can handle it. Our tips will help you clean all parts and mechanisms properly.

Where to wash your bike

A bicycle is a relatively small and light vehicle. You can wash it in several ways:

at home. In warmer months, it is best to wash your bike outdoors. Most often, owners prefer to do this in the yard or on the site near the garage. You can carry out such a procedure even at home, in the bathroom, but this method is less convenient because then you will have to spend time putting things in order in the room;
at the car wash. Is it possible to use the services of a self-service car wash? If you don't have a suitable place to wash your bike, this is a great solution. Using special equipment, you will quickly remove the large layer of dirt that inevitably appears on the wheels when driving off-road in the off-season. But be careful: high water pressure can damage the bike components.

Preparing Bicycle Wash & Cleaners

Before washing your bike, prepare everything you need:

soft rags and sponges.
The advantage of using a sink is its high efficiency in removing dirt and saving time. With brushes and rags, you can finish cleaning small parts and give them an extra shine. Outside the city, you can use mini-washers Bike Chain Quick Clean Tool Brushes with water intake from the tank. They do not need a water connection, just fill the tank with water. Pay attention to compact models of sinks equipped with a rechargeable battery. You can use them at any convenient moment, even far from civilization.

Washing steps for Bicycle Wash & Cleaners

Removal of contamination. Dissolve the detergent in water and apply it to the frame and wheels. If there is heavy dirt, you can first remove the chain, wheels, derailleurs, brakes and put the bike on the fork and handlebar. Most of the dirt can be removed with a high-pressure washer that delivers detergent so you don't have to apply it by hand. Then rinse off the foam with clean water and, if necessary, repeat the procedure. When using a pressure washer, follow the recommendations: the nozzle of the gun must be at least 30 cm from the surface. Do not clean delicate surfaces with a dirt remover.

Cleaning of parts and mechanisms. The chain is cleaned in longitudinal movements using a brush or a special tool. Remove dirt from shifters and brake pads with a soft cloth without the use of abrasive products. Old dirt and grease from the sprockets are removed by hand with a delicate detergent.

Final processing. After washing, thoroughly dry all elements and parts and reattach them. Wipe the saddle, frame, wings with soft suede. Lightly lubricate the outside of the bushings and carriages, chains,s, and sprockets. Use modern compounds that are resistant to moisture, then the bike parts will last as long as possible. Leave the bike for a few hours to allow the grease to penetrate the mechanism, then wipe off the excess with a dry cloth.

0Recently viewed